What drives the cost of an industrial automation project in Ontario
Why two automation quotes for the same line can differ by 3x, the five real cost drivers, and the RFQ details that get you an accurate number the first time.
Field notes from the plant floor
Practical writing on controls, commissioning and keeping lines running. No vendor pitches, no theory for its own sake.
Ignition SCADA vs a panel HMI: how to choose
A practical decision guide for plant engineers: when a panel HMI is the right answer, when Ignition earns its keep, and what a staged migration actually looks like.
A PLC troubleshooting checklist for a line that will not start
A safe, ordered fault-finding sequence for controls technicians: from the E-stop chain and safety relays to comms, program state and outputs - plus what to record before you call anyone.
Industrial electrician or controls tech? How to know which one you need
A practical guide for plant managers on splitting electrical work from controls work: what each trade covers, where they overlap, what Ontario rules require, and how to avoid paying twice.
What industrial millwrights actually fix, and when to call one
Alignment, bearings, gearboxes, conveyors and vibration: what millwright work covers in a plant, the warning signs that precede a failure, and how mechanical and controls faults get confused.
Have a line that needs this looked at?
Send the machine details and the fault history. We will tell you what is worth fixing first.